Explore the Impact of Verifying Carbon Capture Technologies
22 Nov 2024
Read more >Thorne & Derrick, Specialist UK Distributors of LV HV Jointing, Earthing, Substation & Electrical Eqpt up to 66kV, provide expert technical specification, customer support and product supply from stock of an extensive range of Hazardous Area Electrical Equipment – this includes Power, Heating & Lighting products with ATEX Certification for installation in Substation Battery Rooms.
SUBSTATION BATTERY ROOMS
WHAT’S THE RISK?
ATEX
Explosive Flammable Gases/Vapours
UK DNO’s detail safe working procedures and rules in their Document Manuals to be followed when working on alkaline or acid substation batteries and storage rooms located within primary network medium/high voltage substations (MV HV).
Lead-acid type batteries release potentially explosive hydrogen gas when charging – this is the primary explosive risk associated with medium/high voltage substations.
ATEX
Consequently, these worksite locations are classified as hazardous area Zones according to the ATEX Directive – a “hazardous area” is defined as an area in which the atmosphere contains, or may contain in sufficient quantities, flammable or explosive gases, dusts or vapours. The Zone designation depends on the level of risk and likelihood of flammable gas, vapour or mist forming during normal operation.
ATEX is an abbreviation of “Atmospheres Explosibles” and is a set of European Union regulations that are designed to ensure the safety of electrical products being used in potentially explosive atmospheres.
Thorne & Derrick, Experts in Equipment for Explosive Atmospheres, provide Zone 1/Zone 2 (Flammable Gas) ATEX Compliant electrical equipment for installation in substations and battery rooms to provide heating, lighting and power distribution.
THE DANGER ZONES ATEX
The main Dangers to Persons carrying out work or testing on batteries and chargers are electric shock, explosion or burns arising from the ignition of flammable gas which is emitted by cells during the charging process.
Flammable gas can be ignited by naked flames (eg “hot-working” by cable jointers), cigarettes or by sparks if cell terminals are accidentally earthed or shorted together.
This short-circuiting releases dangerous levels of heat, light and arc energy.
Consequently, electrical equipment installed in MV HV substation battery rooms should be Zone 1 or Zone 2 certified according to ATEX Directive for safe installation in such potentially explosive atmospheres.
♦ Primary Network Substation: a 132kV, 66kV, 33kV or 25kV substation including directly associated 66kV, 33kV, 25kV, 11kV and 6.6kV switchboards at transformer stations (Definition: WPD Engineering Specification EE Spec 25/5).
LIGHT | HEAT | POWER
How We Can Help?
♦ Lighting – T&D can provide lighting designs to ensure lux levels are achieved in line with regulations, fittings are located correctly and meet certification requirements – we provide a comprehensive hazardous area lighting system design service.
PIR Motion Sensors
PIR Motion Sensors
♦ Heating – T&D can provide battery room heat loss calculations to ensure the correct heaters are specified and meet ATEX certification requirements to provide adequate comfort heating to the substation.
♦ Power – T&D can specify and supply from stocks Joints & Terminations for the connection and energisation of high voltage power cables to switchgear and transformers up to 66kV.
Raytec | Light Fittings
Abtech | Junction Boxes
Craig & Derricott | Isolators
EXHEAT | Heaters
Marechal | Plug & Sockets
Crowcon | Gas Detectors
Technor | ATEX Enclosures & Control Equipment
Roxtec | Cable Transits
Hawke | Cable Glands
The ATEX PIR detector is a movement sensor that detects a moving body heat (infrared) signature and provides an alarm output signal to the alarm/monitoring system accordingly within the substation battery room.
THORNE & DERRICK
T&D are Specialist Distributors to UK Distribution Network Operators (DNO’s), NERS Registered Service Providers, ICP’s and HV Jointing Contractors of an extensive range of LV, MV & HV Jointing, Earthing, Substation & Electrical Eqpt – this includes 11kV/33kV/66kV joints, terminations and connectors for both DNO and private network applications.
Contact our UK Power Team for competitive quotations, fast delivery from stock and technical support or training on all LV-HV products.
Key Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV
External URL: https://www.powerandcables.com/substation-battery-rooms/
By Thorne & Derrick International
645 Views